1. Go to the site where Proxmox is located (VPS Server Control Panel).



1.1. The address of the panel can be found on the order, in our case it is
Go to order example

Control panel:

URL — https://188.68.205.52:8006

2. You may encounter a warning from the browser that the page is not safe when you click through. See image below






3. To get to the dashboard page, you need to click on Advanced it would look like this. See image below





4. Next, you need to press the button Proceed to 188.68.205.52 (unsafe) and you will be taken to the control panel page, which looks like this: See image below





5. You have reached the panel page and need to enter the panel itself. To do this you must in the field Username enter a login for Proxmox to order; in the field Password enter the password for Proxmox from the order; in the field Realm select Proxmox VE authentication server and press Login. For a sample order, see below

Order successfully activated 

 

IPv4 (shared): 188.68.205.52

root passwd: x

 

Port map:

188.68.205.52:x → 22 (use x for SSH or SFTP)



To route additional ports, write to support : [email protected]

Control panel:

URL — https://188.68.205.52:8006

Login: x

Passwd: x

Realm: Proxmox VE authentication server



Technical information:

Private IP - 192.168.1.x

Subnet mask - 255.255.255.0

Gateway - 192.168.1.1

5.1. This is what it will look like after all the fields have been filled in: See image below





6. After entering, you should see the following. See images below